Standard Activities

PSRC Standards Coordinator's report
2003 - September - 20


 

The Standards Coordinator, Jeff Gilbert deputizing for Mohindar Sachdev, met with the Chairs of the Working Groups writing and revising standards documents at 8:00 AM / 9:45 AM on September 23, 2003 in Senate room, The Madison Concourse Hotel, Madison, WI.

Naeem Ahmed, IEEE Liaison for PSRC made a presentation on the latest practices for handling standards documents and the facilities that IEEE has provided. The status of PARs, Standards and Guides, were then reviewed. The status of the PARs is summarized in this report. The actions to be taken for keeping up-to-date the approval of the PARs and for keeping live the Standards and Guides are identified. A summary of the specific approvals received, since the May 2003 meeting of the PSRC, are identified as well.

Information concerning the Standards Association (SA), Board of Governors, Committees of SA, the Development of standards, Recommended Practices and Guides and related issues is available on the following web site.

standards.ieee.org

Some of the other web sites for obtaining useful information are as follows.

Information on

Web site address

FORMS

 http//www.standards.ieee.org/guides/par/

Style manual

 http://www.standards.ieee.org/resources/glance_at_writing_new.html

Template

 http://www.standards.ieee.org/resources/glance_at_writing_new.html

Status of standards

 http://www.standards.ieee.org/db/status/

NesCom activities

 http://www.standards.ieee.org/board/nes/

RevCom activities

 http://www.standards.ieee.org/board/rev/

Standards Association Operations Manual

 http://www.standards.ieee.org/resources/index.html#guides

Standards Association Bylaws

 http://www.standards.ieee.org/resources/index.html#guides

Standards Board Operations Manual

 http://www.standards.ieee.org/board/

Standards Board Bylaws

 http://www.standards.ieee.org/board/

Up-load drafts for balloting

 http://standards.ieee.org/eprocess/upload_balloting_file/

Request for ballot invitation

 http://standards.ieee.org/resources/development/balloting/bal-inv-form.html

Submit request for balloting

 http://standards.ieee.org/resources/development/balloting/bal-sub-form.html

The new policy in developing standards requires the implementation of the following metric policy.

Proposed new standards and revised standards submitted for approval shall use metric units exclusively in the normative portions of the standard. Inch-pound data may be included, if necessary, in footnotes or annexes that are informative only.

For more information visit thte following Web site.

standards.ieee.org/anouncements/metricpolicy

Standards Coordination Effort
PARs applied for by all Committees of the Power Engineering Society (PES) are being circulated among the Standards Coordinators of the PES Committees. The number and title of each new PAR approved by the Standards Board is posted on the PSRC Web site at the following address.

http://www.pes-psrc.org/Astandards.html

The copy of the PAR can be viewed by clicking at the number of the PAR in the list. All members of the PSRC are requested to review the newly approved PARs. If you are interested in the development work planned in a PAR, contact the Chair of the Working Group that is developing the document and sign up for participating in the activity of that Working Group.

STANDARDS ACTIVITIES SINCE THE MAY 2003 MEETING OF THE PSRC
 
The status of the standards approval activities, which have taken place since the May 2003 meeting of the PSRC, is as follows.

  1. Standards Published

    • None

  2. Standards approved

    • PC37.103 Guide for Differential and Polarizing Circuit Testing

    • PC37.106 Guide for Abnormal Frequency Protection for Generating Plants

  3. Standards submitted for approval

    • C37.103 Guide for Differential and Polarizing Circuit

    • PC37.114 Guide for Determining Fault Location on AC Transmission and Distribution Lines

    • PC37.115 Standard for Test Method for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control and Data Acquisition System

  4. Standards balloted since the May meeting of the PSRC

    • PC37.93 Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels

  5. Standards re-balloted since the May meeting of the PSRC

    • PC37.90 Standard for Relays and Relay Systems Associated with Electric Power Apparatus

    • PC37.103 Guide for Differential and Polarizing Circuit Testing

    • PC37.114 Guide for Determining Fault Location on AC Transmission and Distribution Lines

    • PC37.115 Standard for Test Method for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control and Data Acquisition System

  6. Standards to be re-balloted

    • PC37.90 Standard for Relays and Relay Systems Associated with Electric Power Apparatus

    • PC37.92 Standard for Low Energy Analog Signal Inputs to Protective Relays

  7. Standards being balloted

    • None

    8. The PARs approved since May 2003, submitted, and the PARs for which extension has been applied are as follows. The PARs, which will expire in the near future, are also listed. Applications for extending the lives of these PARs should be filed soon.

  8. New PAR applied for

    • PC37.91 Guide for Protecting Power Transformers

  9. Revised PAR approved

    • PC37.230 Guide for Protective Relay Applications to Distribution Lines

  10. PAR extensions applied for

    • PC37.92 Standard for Low Energy Analog Inputs to Protective Relays

    • PC37.116 Guide for Protective relay Application to Transmission Line Series Capacitor Banks

  11. PAR extensions approved

    • PC37.105 Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

    • PC37.109 Guide for the Protection of Shunt Reactors

    • PC37.116 Guide for Protective relay Application to Transmission Line Series Capacitor Banks

  12. New PARs approved by NesCom

    • None

  13. PARs expiring at the end of 2003

    • PC37.92 Standard for Low Energy Analog Signal Inputs to Protective Relays

    • PC37.114 Guide for Determining Fault Location on AC Transmission and Distribution Lines

SUBMITTAL DEADLINES & STANDARDS BOARD MEETING SCHEDULE

PAR/Standard Submittal Deadline

Standards Board Meeting

October 31, 2003

December 10, 2003

February 13, 2004

March 25, 2004

April 30, 2004

June 10, 2004

August 13, 2004

September 23, 2004

October 19, 2004

December 8, 2004

For further information download the report and spreadsheet from this site

or contact: Mohindar S. Sachdev - PSRC Standards Coordinator at

sachdev@engr.usask.ca