Standard Coordinators Report

2006 - September 19, 2006



The Standards Coordinator, Jeffrey Gilbert, met with the Chairs of the Working Groups writing and revising standards documents at a session beginning at 8:00 AM on  September 19, 2006, in the Atlanta C & D room of the Marriott Renaissance Atlanta Hotel

The status of selected PARs, Standards and Guides, were reviewed at the meeting. The status of the PARs is summarized below. The actions to be taken for keeping up-to-date the approval of the PARs and for keeping live the Standards and Guides are identified. A summary of the specific approvals received, since the May 2006 meeting of the PSRC, are identified as well.

Information concerning the Standards Association (SA), Board of Governors, Committees of SA, the Development of standards, Recommended Practices and Guides and related issues is available on the following web site.

http://standards.ieee.org/

Some of the other web sites for obtaining useful information are as follows.

 

                                                                                                                                               

Information on

Web site address

Update your information with SA

 

http://standards.ieee.org/resources/development/

myBallot Voter presentation

http://standards.ieee.org/db/balloting/myballotdemo.ppt

myBallot Chair presentation

http://standards.ieee.org/db/balloting/myballotchairdemo.ppt

PAR application, extension and other forms

http://www.standards.ieee.org/guides/par/

 

 

Submitting a PAR

http://standards.ieee.org/guides/par/ePARform.html

PAR Extension

http://standards.ieee.org/guides/par/extension.rtf

Style manual

http://www.standards.ieee.org/guides/style/2000Style.pdf

Template

http://www.standards.ieee.org/resources/spasystem/index.html

Up-load drafts for balloting

http://standards.ieee.org/eprocess/upload_balloting_file/

 

Request for invitation to ballot

http://standards.ieee.org/resources/development/

 

Join a balloting pool

Follow: Balloting the Draft ® Ballot Invitation ® Requesting a Ballot Invitation

Submit request for initiating balloting

http://standards.ieee.org/resources/development/

Follow: Balloting the Draft ® Sponsor Ballot ® Requesting Initiation of a Ballot

Submit request for recirculation ballot

http://standards.ieee.org/resources/development/

Follow: Balloting the Draft ® Sponsor Ballot ® Requesting Initiation of a Ballot ® Recirculation ballot

Status of standards etc

Http://www.standards.ieee.org/db/status/status.txt

NesCom activities

http://www.standards.ieee.org/board/nes/

RevCom activities

http://www.standards.ieee.org/board/rev/

SA Operations Manual

http://standards.ieee.org/sa/sa-om-toc.htm

 

SA Bylaws

http://standards.ieee.org/guides/bylaws/index.htm

SB Operations Manual

http://standards.ieee.org/guides/opman/index.html

SB Bylaws

http://standards.ieee.org/guides/bylaws/index.html

 

 

 

 




important Information

All Standards developing groups are required to submit an L50-S form annually beginning in 2006.  The report for 2006 is due March 2007; however, there is no need for working group chairs to submit the form.  The Standards Coordinator will submit one L50-S on the behalf of all PSRC working groups, indicating that the working groups have no financial activity to report.  Do not send reports to the PSRC secretary

 


Standards Coordination Effort

PARs applied for by all Committees of the Power Engineering Society (PES) are circulated among the Standards Coordinators of the PES Committees. Every PAR approved by the Standards Board is posted on the SA Web site at the following address.

http://standards.ieee.org/board/nes/approved.html

The following PARs approved by the IEEE-SA Standards Board may be of interest to PSRC attendees.

PC37.2 -  Device Function Numbers

PC93.4 - Standard for Power-Line Carrier Line-Tuning Equipment (30-500kHz) Associated With Power Transmission Lines

 

If you are interested in the development work planned in a PAR, contact the Chair of the Working Group that is developing the document and sign up for participating in the activity of that Working Group.


Standards Activities Since The May 2006 Meeting

The status of the standards activities, which have taken place since the May, 2006, meeting of the PSRC, are as follows.

1.           Standards Published

None

 

2.              Standards waiting to be Published

C37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

 

C37.101

IEEE Guide for Generator Ground Protection

3.              Standards reaffirmed

C37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

4.              Standards withdrawn

None

 

5.              Standards approved

C37.101

IEEE Guide for Generator Ground Protection

6.           Standards submitted for approval

 

PC37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

 

C37.101

 IEEE Guide for Generator Ground Protection

 

 

PC37.102

Guide for AC Generator Protection                                                       

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

 

7.           Standards to be submitted for approval

None

 

8.            Submitted for Balloting/ Recirculation

 

C37.90.3

IEEE Standard Electrostatic Discharge Tests for Protective Relays

 

PC37.91

Guide for Protecting Power Transformers

 

PC37.101

IEEE Guide for Generator Ground Protection

 

 

PC37.102  

Guide for AC Generator Protection                                                       

 

PC37.109

Guide for the Protection of Shunt Reactors

C37.112

IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays

 

 

PC37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

 

PC37.117

Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

 

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

 

PC37.232

Recommended Practice for Naming Time Sequence Data Files

 

 PC57.13.1

Guide for Field Testing of Relaying Current Transformers

 

 

 

 

9.       Standards Balloted

PC37.117

Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

PC37.232

Recommended Practice for Naming Time Sequence Data Files

10.       Standards Re-circulated

PC37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

 

PC37.101

IEEE Guide for Generator Ground Protection

 

 

PC37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

 

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

11.       Standards to be Re-circulated

PC37.105

Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

12.       Standards due for 5 year review/to be submitted for Re-affirmation

C37.90.3

IEEE Standard Electrostatic Discharge Tests for Protective Relays

 

C37.96

IEEE Guide for AC Motor Protection

 

C37.98             

IEEE Standard Seismic Testing of Relays

 

C37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

 

C37.101

IEEE Guide for Generator Ground Protection

 

C37.102

IEEE Guide for AC Generator Protection

 

 

C37.109

Guide for the Protection of Shunt Reactors

C37.110

 

IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes

 

C37.112

 

IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays

 

C57.13.1

Guide for Field Testing of Relaying Current Transformers

 

 

 

 

 

 

 The PARs approved since May, 2006, submitted, and the PARs for which extension has been applied are as follows.  PARs, which will expire in 2006, are also listed.  Applications for extending the lives of these PAR's must be submitted before the 16 October 2006 submittal deadline (for the December 2006 standards board meeting).

 

13.        New PARs applied for

P1706

Guide for Power System Protective Relay Applications over Digital Communication Channels

14.        New PARs approved

P1706

Guide for Power System Protective Relay Applications over Digital Communication Channels

 

 

 

 

15.        PAR Extensions applied for

None

 

16.        PAR Extensions approved

None

 

17.        Modified PAR approved

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

18.        Modified PAR Submitted

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

19.        PARs Wthdrawn

None

 

20.        PARs expiring at the end of 2006

 

PC37. 98

Standard  Seismic Testing of Relays

 

 

PC37.101                     

Guide for Generator Ground Protection

 

 

PC37.102

Guide for AC Generator Protection

 

PC57.109

Guide for the Protection of Shunt Reactors

 

 

PC37.110

Guide for the Applications of Current Transformers Used for Protective Relaying Purposes

 

 

PC37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

 

 

PC37.117

Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

 

 

PC37.230

Guide for Protective Relay Applications to Distribution Lines

 

 

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

 

 

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

 

 

 

 

 

 

 

 

 

 

SUBMITTAL DEADLINES & STANDARDS BOARD MEETING SCHEDULE

PAR/Standard Submittal Deadline

Standards Board Meeting

October 16, 2006

December 1, 2006

February 9, 2007

February 21, 2007

April 27, 2007

May 15, 2007

October 15, 2007

November 29, 2007

 

For further information download the report and spreadsheet from this site

or contact: Jeffrey G. Gilbert - PSRC Standards Coordinator at:

jggilbert@ieee.org/font>