Standard Coordinators Report

January 9, 2007




The Standards Coordinator, Jeffrey Gilbert, met with the Chairs of the Working Groups writing and revising standards documents at a session beginning at 8:00 AM on  January 9, 2007, in the Painted Mtn. B room of the Embassy Suites Hotel - Scottsdale, Arizona.

The status of selected PARs, Standards and Guides, were reviewed at the meeting. The status of the PARs is summarized below. The actions to be taken for keeping up-to-date the approval of the PARs and for keeping live the Standards and Guides are identified. A summary of the specific approvals received, since the May 2006 meeting of the PSRC, are identified as well.

Information concerning the Standards Association (SA), Board of Governors, Committees of SA, the Development of standards, Recommended Practices and Guides and related issues is available on the following web site.

http://standards.ieee.org/

Some of the other web sites for obtaining useful information are as follows.

 

                                                                                                                                               

Information on

Web site address

Update your information with SA

 

http://standards.ieee.org/resources/development/

myBallot Voter presentation

http://standards.ieee.org/db/balloting/myballotdemo.ppt

myBallot Chair presentation

http://standards.ieee.org/db/balloting/myballotchairdemo.ppt

PAR application, extension and other forms

http://www.standards.ieee.org/guides/par/

 

Submitting a PAR

http://standards.ieee.org/guides/par/ePARform.html

PAR Extension

http://standards.ieee.org/guides/par/extension.rtf

Style manual

http://www.standards.ieee.org/guides/style/2000Style.pdf

Template

http://www.standards.ieee.org/resources/spasystem/index.html

Up-load drafts for balloting

http://standards.ieee.org/eprocess/upload_balloting_file/

 

Request for invitation to ballot

http://standards.ieee.org/resources/development/

Join a balloting pool

Follow: Balloting the Draft ® Ballot Invitation ® Requesting a Ballot Invitation

Submit request for initiating balloting

http://standards.ieee.org/resources/development/

Follow: Balloting the Draft ® Sponsor Ballot ® Requesting Initiation of a Ballot

Submit request for recirculation ballot

http://standards.ieee.org/resources/development/

Follow: Balloting the Draft ® Sponsor Ballot ® Requesting Initiation of a Ballot ® Recirculation ballot

Status of standards etc

Http://www.standards.ieee.org/db/status/status.txt

NesCom activities

http://www.standards.ieee.org/board/nes/

RevCom activities

http://www.standards.ieee.org/board/rev/

SA Operations Manual

http://standards.ieee.org/sa/sa-om-toc.htm

 

SA Bylaws

http://standards.ieee.org/guides/bylaws/index.htm

SB Operations Manual

http://standards.ieee.org/guides/opman/index.html

SB Bylaws

http://standards.ieee.org/guides/bylaws/index.html

 

 

 

 

Important Information

All Standards developing groups are required to submit an L50-S form annually beginning in 2006.  The report for 2006 is due March 2007; however, there is no need for working group chairs to submit the form.  The Standards Coordinator will submit one L50-S on the behalf of all PSRC working groups, indicating that the working groups have no financial activity to report.  Do not send reports to the PSRC secretary

 

Standards Coordination Effort                                                                                            

A link to a list of PSRC standards and standard projects has been added to the PSRC standards web page.

PARs applied for by all Committees of the Power Engineering Society (PES) are circulated among the Standards Coordinators of the PES Committees. Every PAR approved by the Standards Board is posted on the SA Web site at the following address.

http://standards.ieee.org/board/nes/approved.html

The following PAR has been approved by the IEEE-SA Standards Board may be of interest to PSRC attendees.

P1777 - Using Wireless Data Communications in Power System Operations

Chair : Frances M Cleveland, Email: fcleve@ix.netcom.com

If you are interested in the development work planned in a PAR, contact the Chair of the Working Group that is developing the document and sign up for participating in the activity of that Working Group.

Standards Activities Since The May 2006 Meeting

The status of the standards activities, which have taken place since the May, 2006, meeting of the PSRC, are as follows.

1.           Standards Published

None

 

2.            Standards waiting to be Published

C37.101

IEEE Guide for Generator Ground Protection

 

C37.102

Guide for AC Generator Protection

 

 

C37.109

Guide for the Protection of Shunt Reactors

 

 

C37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

 

C37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

 

 

C57.13.1

Guide for Field Testing of Relaying Current Transformers

 

 3.           Standards reaffirmed

C37.90.3

IEEE Standard Electrostatic Discharge Tests for Protective Relays

C37.96

IEEE Guide for AC Motor Protection

C37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

4.              Standards submitted for reaffirmation

C37.112

IEEE Standard Inverse-Time Characteristic Equations for Overcurrent Relays

5.              Standards approved

PC37.102

Guide for AC Generator Protection                                     

 

PC37.109

Guide for the Protection of Shunt Reactors

 

 

PC37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

 

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

 

PC57.13.1

Guide for Field Testing of Relaying Current Transformers

 

6.           Standards submitted for approval

PC37.102

Guide for AC Generator Protection

PC37.109

Guide for the Protection of Shunt Reactors

PC37.116

Guide For Protective Relay Application To Transmission-Line Series Capacitor Banks

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

PC37.102

Guide for AC Generator Protection

7.           Standards to be submitted for approval

None

 

8.            Submitted for Balloting/ Recirculation

 

PC37.91

Guide for Protecting Power Transformers

PC37.117

Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

 

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

PC37.232

Recommended Practice for Naming Time Sequence Data Files

9.       Standards Balloted

PC37.91

Guide for Protecting Power Transformers

10.       Standards Re-circulated

PC37.117

Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

 

PC37.231

Recommended Practice for Microprocessor-based Protection Equipment Firmware Control

 

PC37.232

Recommended Practice for Naming Time Sequence Data Files

 

11.       Standards to be Re-circulated

PC37.105

Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

12.       Standards due for 5 year review/to be submitted for Re-affirmation

 

 

 

C37.94

Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment.

 

C37.95

IEEE Guide for Protective Relaying of Utility-Consumer Interconnections

 

C37.104

Guide for Automatic Reclosing of LineCircuit Breakers for AC Distribution and Transmission Lines

 

C37.108

Guide for the Protection of Network Transformers

 

C37.90.1

Standard Surge Withstand Capability (SWC) Tests for Protective Relays and Relays Systems

 

 

 

 

 

 

The PARs approved since September, 2006, submitted, and the PARs for which extension has been applied are as follows.  PARs, which will expire in 2007, are also listed.  Applications for extending the lives of these PAR's must be submitted before the 15 October 2007 submittal deadline (for the December 2007 standards board meeting).

13.        New PARs applied for

PC37.99

IEEE Guide for the Protection of Shunt Capacitor Banks

 

 

14.        New PARs approved

None

 

15.        PAR Extensions applied for

PC37.110

Guide for the Applications of Current Transformers Used for Protective Relaying Purposes

PC37.230

Guide for Protective Relay Applications to Distribution Lines

16.        PAR Extensions approved

PC37.110

Guide for the Applications of Current Transformers Used for Protective Relaying Purposes

PC37.230

Guide for Protective Relay Applications to Distribution Lines

17.        Modified PAR approved

None

 

18.        Modified PAR Submitted

None

 

19.        PARs Wthdrawn

PC37. 98

Standard  Seismic Testing of Relays

20.        PARs expiring at the end of 2007

 

PC37.105

Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

 

 

PC37.110

Guide for the Applications of Current Transformers Used for Protective Relaying Purposes

 

 

 

 

 

 

 

 

 

SUBMITTAL DEADLINES & STANDARDS BOARD MEETING SCHEDULE

PAR/Standard Submittal Deadline

Standards Board Meeting

February 9, 2007

February 21, 2007

April 27, 2007

May 15, 2007

October 15, 2007

November 29, 2007

 

For further information download the report and spreadsheet from this site

or contact: Jeffrey G. Gilbert - PSRC Standards Coordinator at:

jggilbert@ieee.org/font>