Standard Coordinators Report January 13, 2011
Important Information
The IEEE SASB is proposing a resolution to eliminate the 'Reaffirmation' and 'Stabilization' processes. Sponsors will have to complete a Revision on a maintained standard every 10 years, as opposed to starting a Reaffirmation every 5 years. This would be effective 2012. Comments are due by 2/28/2011.
Standards Activities Since The September, 2010 Meeting
The status of standards activities that have taken place since the September, 2010 meeting of the PSRC are as follows.
1. Standards Published
PC37.105 IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
2 Standards waiting to be Published
PC37.110/COR 1 Guide for the Applications of Current Transformers Used for Protective Relaying Purposes
3. Standards Reaffirmed
C37.93 Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels
C37.103 Guide for Differential and Polarizing Relay Circuit Testing
C37.119 Guide For Breaker Failure Protection of Power Circuit Breakers
4. Standards submitted for reaffirmation
C37.93 Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels
C37.103 Guide for Differential and Polarizing Relay Circuit Testing
C37.119 Guide For Breaker Failure Protection of Power Circuit Breakers
5. Standards approved
PC37.105 IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
PC37.110/COR 1 Guide for the Applications of Current Transformers Used for Protective Relaying Purposes
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
6. Standards submitted for approval
PC37.105 IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
PC37.110/COR 1 Guide for the Applications of Current Transformers Used for Protective Relaying Purposes
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
7. Standards to be submitted for approval
None
8. Submitted for Balloting/ Recirculation
C37.90 Standard for Relays and Relay Systems Associated with Electrical Power Apparatus
C37.103 Guide for Differential and Polarizing Relay Circuit Testing
PC37.110/COR 1 Guide for the Applications of Current Transformers Used for Protective Relaying Purposes
C37.119 Guide For Breaker Failure Protection of Power Circuit Breakers
9. Standards Balloted
C37.90 Standard for Relays and Relay Systems Associated with Electrical Power Apparatus
C37.92 Standard for Low Energy Analog Signal Inputs to Protective Relays
PC37.110/COR 1 Guide for the Applications of Current Transformers Used for Protective Relaying Purposes
PC37.238 Standard Profile for Use of IEEE Std. 1588 Precision Time Protocol in Power System Applications
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
10. Standards Re-circulated
C37.93 Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels
C37.90 Standard for Relays and Relay Systems Associated with Electrical Power Apparatus
C37.103 Guide for Differential and Polarizing Relay Circuit Testing
C37.119 Guide For Breaker Failure Protection of Power Circuit Breakers
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
10. Standards to be Re-circulated
None
12. Standards due for 5 year review /to be submitted for Re-affirmation
C37.90.3 Standard Electrostatic Discharge Tests for Protective Relays
C37.96 Guide For AC Motor Protection (active PAR)
C37.99 Guide for Protection of Shunt Capacitor Banks (active PAR)
C37.101 Guide for Generator Ground Protection
C37.102 Guide For AC Generator Protection
C37.109 Guide for the Protection of Shunt Reactors
C37.231 Recommended Practice for Microprocessor-based Protection Equipment Firmware Control
C57.13.1 Guide for Field Testing of Relaying Current Transformers
13. Standards withdrawn
PC37.115 Standard Test Methods for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control and Data Acquisition System
14. New PARs applied for
PC37.232 Standard for Common Format for Naming Time Sequence Data Files (COMNAME)
PC37.240 Standard for Cyber Security Requirements for Substation Automation, Protection and Control Systems
15. New PARs approved
PC37.114 Guide for Determining Fault Location on AC Transmission and Distribution Lines
PC37.240 Standard for Cyber Security Requirements for Substation Automation, Protection and Control Systems
PC37.242 Guide for Synchronization, Calibration, Testing and Installation of Phasor Measurement Units for Power System Protection and Control
PC37.243 Guide for Application of Digital Line Current Differential Relays Using Digital Communication
16. PAR Extensions applied for
PC37.113 Guide for Protective Relay Applications of Transmission Lines
PC37.236 Guide for Power System Protective Relay Applications over Digital Communication Channels
PC37.113 Guide for Protective Relay Applications of Transmission Lines
PC37.236 Guide for Power System Protective Relay Applications over Digital Communication Channels
18. Modified PAR approved
PC37.113 Guide for Protective Relay Applications of Transmission Lines
PC37.118.1 Standard for Synchrophasor Measurements for Power Systems (PC37.118 modified)
PC37.239 Standard Common Format for Event Data Exchange (COMFEDE) for Power Systems
19. Modified PAR Submitted
PC37.113 Guide for Protective Relay Applications of Transmission Lines
20. PARs Withdrawn
PC37.115 Standard Test Methods for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control and Data Acquisition Systems
21. PARs expiring at the end of 2011
PC37.96 Guide For AC Motor Protection
PC37.99 Guide for Protection of Shunt Capacitor Banks
PC37.111 Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems
PC37.237 Recommended Practice for Time Tagging of Power System Protection Events
SUBMITTAL DEADLINES & STANDARDS BOARD MEETING SCHEDULE
PAR/Standard Submittal Deadline Standards Board Meeting
February 18, 2011 March 29, 2011
May 6, 2011 June 14, 2011
July 29, 2011 September 8 , 201
October 17, 2011 December 6, 2011